We are offering Turbine Oil Cleaning Systems, which are specially designed and integrated for maintaining the high performance level of the machinery. These cleaning systems maintain oil properties like viscosity and lubricity, and remove 100% solid + water / moisture contamination from oil. Our cleaning systems / Oil filtration systems prevent wear and tear of machine components, thus increasing the overall efficiency and life of bearings, pumps, seals and gears.

Technicalities and functionality:

• Even the transparent oil has certain amount of dissolved moisture, which increases with time and the emulsification process starts
• This leads into the oil losing its transparency, becoming milky white and after the saturation limit; the water & oil get separated
• Water settles down at the bottom in free form
• Excess water can always be separated from oil by heating it up to 500C and then allowing it to settle down as oil remains on the upper surface
• Then it can be easily taken out manually by decantation or similar process
• Our purifier should not be used to remove such type of excess water which can be separated easily and manually, rather it is one of those machines, which are able to remove dissolved or emulsified water
• It can be used for bringing the moisture to almost zero level and making the oil dry to retard oxidation and acid formation
• If require, it may be employed for removing even 6 or 7 % water, otherwise it should be avoided as consumption of filters will be more and uneconomical
• Even new oil has at least 0.06% moisture.