Hydrogage / Hydrogauge
Hydrogage / Hydrogauge is a hand-held device used for testing water percentage in oil. The readings are obtained in %age and ppm levels of moisture in oil. The range of operation is 0. 05% to 5% moisture.
Principle of operation : amount of hydrogen gas released from water molecules present in oil sample due to its reaction with sodium reagent; increases the pressure of the air-tight chamber. The pressure increase
calibrated as %age of moisture in oil thus gives the desired result.
Water Test Kit
BRAND: GESERCO, FRANCE
WaterTest ®
Field test kit for water content.
The GESERCO WaterTest® allows for accurate and cost-effective measurement of the water content in any little volatile liquids.
It is applicable to measuring water content into:
- Mineral Oils and Petroleum Products (Motor Oils, Fuels, Brake Fluids, Gearbox Oils, Solvents…)
- Synthetic Oils and Synthetic Lubricants
- Bio Diesels
- Bio Oils and Bio Lubricants
- Vegetable Oils
- Aromatic liquids
- Alcohols
- Soluble Solid Products (Greases…)
PreciWaterTest ®
High accuracy measurement of water contents under ISO9114:1997 standard.
The GESERCO PreciWaterTest® allows for accurate and cost-effective measurement of the water content in any little volatile liquids.
It is applicable to measuring water content into:
- Mineral Oils and Petroleum Products (Motor Oils, Fuels, Brake Fluids, Gearbox Oils, Solvents…)
- Synthetic Oils and Synthetic Lubricants
- Bio Diesels
- Bio Oils and Bio Lubricants
- Vegetable Oils
- Aromatic liquids
- Alcohols
- Soluble Solid Products (Greases…)
The water content measurement is simple and easy to perform within minutes.
The GESERCO PreciWaterTest® conforms to the ISO9114:1997 standard for the measurement of water contents into petroleum products.
UltraPreciWaterTest ®
High accuracy measurement of low water contents under ISO9114:1997 standard.
The GESERCO UltraPreciWaterTest® allows for accurate and cost-effective measurement of the water content in any little volatile liquids.
It is applicable to measuring water content into:
- Mineral Oils and Petroleum Products (Motor Oils, Fuels, Brake Fluids, Gearbox Oils, Solvents…)
- Synthetic Oils and Synthetic Lubricants
- Bio Diesels
- Bio Oils and Bio Lubricants
- Vegetable Oils
- Aromatic liquids
- Alcohols
- Soluble Solid Products (Greases…)
The water content measurement is simple and easy to perform within minutes.
The GESERCO UltraPreciWaterTest® conforms to the ISO9114:1997 standard for the measurement of water contents into petroleum products.
Aviation WaterTest
Measurement of water content in aviation hydraulics.
The WTGC-96-10000 Aviation Water Test from GESERCO was developped as a joint project with AIRBUS INDUSTRY to respond to the need for a simple aND rapid detection tool for water presence in aircraft hydraulics.
The WTGC-96-10000 unit includes all accessories and equipment required for sampling the oil from the aircraft circuitry and measuring its water content.
- Measuring range: 0 to 10 %H2O
- Accuracy: ±100ppm
- Time to measurement result: 5 minutes
- Operating principle: reacting method
The WTG-96-10000 kit includes all accessories and reagents suitable for performing 160 water tests.
The GESERCO WTG-96-10000 water test kit is an approved ground support equipment for AIRBUS aircrafts.
Shell Water Detector
Supplied In Boxes. Each Box Containing 10 Tubes Or 80 Capsules, The Capsules Are Used To Determine The Presence Of Finely Dispersed Undissolved Water In Jet Fuel At Concentrations Lower Than Normally Detectable By Visual Examination.